Category Archives: Stanley 1996

Cutting Roofing and Flooring Using Hooked Blades and Carpet Fitting Tools

Choosing the right hooked blades and carpet fitting tools for the job you plan to embark on is of the upmost importance. Our knives and blades are made in Sheffield and are of the highest quality, ideal for cutting flooring, textiles or roofing material.

Hooked blades are perfect for cutting roofing shingles before they are affixed to the roof of the building in question. It is important to keep roof shingles from lining up exactly, because without gaps the water may be unable to pass between them and under them. This prevents the roof from leaking and damaging the interior of the house, which could have a large financial impact on the occupants of the house.  Most tiles have guide marks on them which will make it far easier to use the hooked blade to cut the roofing shingles accurately.

When cutting the tiles with the hooked blade, it is important to take care to keep in line with the guide marks on the tile. Straying from them may result in an uneven pattern when the shingle is attached to the roof.

Cuts on your roofing shingles must keep to a in a uniform pattern, therefore the correct hooked blade will ensure that the cuts are even. Hooked blades can also be used to cut shingles so that they fit around pipes by cutting a circular cut out to fit the shingle around the pipe.

 

 

Trimming Knife Blades for Professional Tradesmen and Businesses

Based in Sheffield, Knife-point is dedicated to supplying businesses, professional tradesmen and private individuals with hooked blades, concave blades, trimming knife blades and scraper blades. We only supply the highest quality knives and blades to our customers, upholding the reputation of Sheffield as being the finest knife making city in the UK and possibly the world.

We provide a range of concave blades, trimming knife blades and scraper blades to a variety of people in all kinds of different industries. Scraper blades are perfect for painters and decorators because they do an excellent job of stripping wallpaper.

When the existing wall paper needs to be stripped from a wall because a new type is being put up or a home makeover is on the cards, scraper blades are the ideal choice. They are sharp enough to effectively remove the layer or layers of wallpaper without damaging the material underneath, and they are very resistant to bending even when a certain amount of pressure is applied to the scraper blade. Scraper blades from Knife-point can also be used for stripping artex and plaster board.

Trimming knife blades are also handy tools that can be ordered directly from Knife-point. Made in Sheffield, these general purpose blades are of the highest quality and are very heavy duty for long life and durability. These trimming knife blades can be used to cut carpet, vinyl and any other type of sheet material. They are also compatible with Stanley knives and can be used as a value replacement for Stanley knife blades.

Trimming knife blades should be in the toolbox of any good craftsman or tradesman, and these blades can be relied upon to last a long time. They have reversible polished steel blades which have very accurately ground cutting edges for precision cutting and minimal mistakes.

Every one of the hooked blades, concave blades, trimming knife blades and scraper blades on offer at Knife-point are very competitively priced and excellent quality. Our prices are very low for a knife and blade supplier with such a high quality of products and we try really hard to keep our prices competitive. We are also able to negotiate pricing when we receive a scheduled bulk or volume purchase. For this kind of discount, all you have to do is simply call us and we can have a chat about what we can do. We will do our very best to give you the best possible deal on top of our already very low pricing.

 

 

 

Hooked Blades for Cutting Flooring, Roofing and Textiles

Hooked blades from Knife-point in Sheffield are of the highest quality. Our Sheffield based knife and blade business is one of the industry leaders in blades and we stock a variety of different products including Stanley knife blades and concave blades. We also supply a wide range of good quality and affordable hooked blades and carpet fitting tools to business across the UK, especially those that need to cut flooring, roofing or textiles in their everyday work.

When choosing the right hooked blade, it is important to make sure that the blade fits into your retractable utility knife. Before ordering from our knife and blade website, it is also important to ensure that the hooked blade is exactly the right type of blade to fit your utility knife, and will therefore be suitable to use for your cutting needs. Hooked blades are ideal for roofing contractors and carpet or floor installers, as they carry out the job quickly and efficiently without damaging the underlying material.

Hooked blades can be used for cutting roofing shingles before they are affixed to the roof of the building in question. This is important because roof shingles need to be kept from lining up exactly without gaps so that water can still pass between them and under them. This action obviously prevents the roof from leaking and damaging the interior of the house. Most tiles have guide marks on them which will make it far easier to use the hooked blade to cut the roofing shingles accurately.

Care should be taken to cut the tiles with the hooked blade in keeping with the guide marks on the tile, as deviating from these lines may create an awkward pattern when the shingle is attached to the roof. The correct hooked blade will ensure that the cuts on your roofing shingles remain in a uniform pattern. Hooked blades can also be used to cut shingles so that they fit around pipes. By cutting a circular cut out to fit the shingle around the pipe, a neat job can be achieved that will look good.

Hooked blades are used a lot for roofing, flooring and textiles; because they can be used to cut surface materials without damaging whatever is underneath. Hooked blades can be used for cutting carpet or linoleum. They are particularly handy for cutting carpet and lino because they are designed to be used for cutting without causing any damage to the surface beneath.

The Use of Concave Blades and Trimming Knife Blades for Precision Cutting

Concave blades and trimming knife blades are perfect for precision cutting on materials such as leather and marquetry. These types of blades are the perfect solution for projects that require a large amount of accuracy. Concave blades can be used on many different materials including composite aluminium sheet, wood, miliput, and craft materials. They can also be used for cutting fabrics and carpets.

Hooked blades have a hooked cutting edge at each end of the blade which makes them ideal for cutting sheet material. A hooked blade allows you to quickly and easily hook the blade over the end of the sheet of material that you would like to cut. You can then draw back; cutting only the layer of the sheet material that you wish to.

Hooked blades are the perfect type of blade for cutting sheet material including floor coverings and sheeting made of plastic. They can also be used for trimming roofing materials, linoleum and carpet fabrics. The blades themselves have deep hooks for cutting thick materials and work well in most standard utility knives. Hooked blades are perfect for use in the packaging industry.

Stanley Knife Blades and the Safe Use of Them

It is really important to use a Stanley knife in a safe way, whether it is a Stanley 1992, Stanley 5192 or a Stanley 1996. One of the ways to protect yourself from Stanley knife blades is to wear protective goggles to prevent damage to your eyes. The sharp cutting blade of the knife can release bits of whatever surface you are cutting through, and this may get in your eyes if goggles are not worn to protect them.

If you are cutting through a thicker surface, then making a series of shallow cuts will penetrate the thick material thicker and faster than trying to cut through it in one go. By making shallow incisions with your Stanley knife blade, you can reduce your chances of the blade slipping and maybe even breaking in the process.

Another way of keeping yourself safe when you use Stanley knife blades is to make sure that you replace it whenever it becomes dull. You can tell when a blade is becoming old as it will feel more like it is tearing through the material rather than cutting through it. This can make the blade slip and therefore create a safety hazard.

High Quality Planer Blades from Bosche and Black & Decker

Bosche planer blades and black & decker planer blades are tough and extremely durable, making them perfect for projects that need high levels of precision and accuracy.

Bosche planer blades and black & decker planer blades are also very high quality and are often much better than other brands who are their competitors. Choosing a very good quality planer blade is really important for critical jobsite applications so that high levels of accuracy and precision are met.

It’s very important to stay safe when using a planer. If you want to only take off a small amount of wood with your Bosche planer blade, you should set your planer to the lowest setting. Wearing safety goggles is very important when you use your planer blades, whether it is a Bosche planer blades and black & decker planer blade, because fragments of wood and dust can be harmful should they get into your eyes. Having a pair of goggles that fit you properly is also important, as a loose pair may still allow wood and dust to enter your eyes.

After you have turned the planer off, make sure you protect yourself, the work and the blades by setting the front shoe of the planer up on a wood block while the spinning cutter head slows down and stops altogether.

Balancing your body properly when using a planer with Bosche planer blades or black & decker planer blades is very important. To balance, it is best to stand with your feet apart in a comfortable position. This is important because you need to be balanced and comfortable through the process and each pass of the planer blade requires a regular rhythm of balance and hand pressure.

To begin using your planer, you should rest the front shoe of the planer flat against the wood you wish to plane, without letting the Bosche planer blade or black & decker planer blade touch the work. When you start up your planer, you should wait a few seconds until the motor reaches its full speed, and then ease the plane into contact with the work. You should then begin to push it forward at a steady pace. It is important to keep your pressure on the front of the planer as it enters your piece of work, and to keep your planer blade parallel with the wood.

How to Ensure the Safe Usage of Stanley Knife Blades

Before you begin cutting whatever it is you wish you to cut, you must make sure that you check the Stanley knife blade is securely seated in the knife itself. Stanley knife blades are fully replaceable, and this means that they will slide out of the knife easily for when they need to be replaced. This also means that your knife will always have a sharp blade as long as you replace it regularly, which you should do for optimum use and effective cutting.

Before you use your Stanley knife blades to cut a material, you must ensure that the blade itself is not loose in any way. You must also make sure that, should you be using a retractable blade, it is fully extended from the body of the knife before you begin the process of cutting.

Before you begin to use your Stanley 1992, Stanley 5192 or your Stanley 1996, you should make sure you are standing in front of the surface you wish to cut, with your feet securely placed on the floor. It is best to kneel or stand to one side of the line you wish to cut if you are cutting on a surface that is below the level of your chest. This will give you the best control of your Stanley knife blade, and make sure that your body is well out of the way of the edge of the surface that you are cutting.

The next step in the cutting process is to place your free hand, as in the one that is not holding the knife, in an area that you will be able to support yourself if you need to.  Your free hand must be at the very least six inches from the cutting line of your Stanley knife blade. This way, you will have time to move out of the way before you injure yourself, and save your hand should an accident occur.

As you pull the knife toward you as you cut, make sure that you do not push the blade away from you when it is on a cutting line. A pulling motion should be used, which makes the cutting process faster and much more efficient. This method of cutting also makes it far less likely for the Stanley knife blades to slip when you pull it towards you.

Hobby Craft and the Use of Knives, Blades and Tools

As traditional, Sheffield based suppliers of knives and blades, including Stanley knife blades; Knife-Point stock an extensive range of crafting knives and tools. We also offer a full range of the appropriate replacement blades at a very competitive price, with fast delivery and discounts for bulk buying. Perfect for use in trades, DIY work, hobbies and crafts, our knives, blades and scrapers are a great option for a variety of industries. They are also of very high quality and made to last.

We stock an extensive and diverse range of Stanley knife blades including Stanley 1992, Stanley 5192 and Stanley 1996, which are perfect for a variety of crafting and hobby craft projects. Using these great blades, you will be able to cut a range of materials with precision, ease and intricate detail. Our hobby tools, blades and knives make the best tools for art and craft projects and modelling. As reputable suppliers of knives and blades, Knife-Point have been supplying businesses and individuals alike with craft knives, Stanley knife blades and trimming knife blades for a number of years.

Hobbyists and professionals alike find our range of Olfa knives and trimming knife blades just what they need for their projects. Whether it is hobby craft, art and craft or modelling, our range of knives and blades produce consistent, accurate cuts that will give you the quality finish you are looking for.

Our range of trimming knife blades and Olfa knives are great for precision cutting requirements often needed for craft projects. They are also perfect for when you need the highest level of control and precision, and will effectively cut through lighter materials including paper and card, and fabric and material. They are also suitable for cutting through thicker materials including plastics, balsa wood and even thin metal. Here at Knife-Point, we are sure to have the right knife or blade for your crafting, DIY or hobby craft project.

Our range of Stanley knives provides the perfect choice for any avid crafters project. We stock Stanely 1992, Stanley 5192 and Stanley 1996, among many other knives and blades, meaning that you can always find what you need with Knife-Point. Our knives and knife blades are durable and reliable, and will easily cut through all grades of paper, mat board, foam board, fabrics, sheet metal and plastic. Great for individuals and professionals, our range is so wide that you are sure to find just what you need.

Online supplier of safety knives, stanley knives, hooked blades and concave blades

Knife-Point are based in the city of Sheffield, which has a rich history in knife making and an excellent reputation for being the finest manufacturing city of knives and cutlery in the UK. From safety knives to stanley knives, from hooked blades to concave blades, Knife-Point can supply a range of quality knives and blades to businesses, individuals and professional tradesmen. Sheffield’s history in cutlery making goes back as far as 1000 years and the city of Sheffield is still regarded as the centre of UK knife making.

Knife-Point are proud that their range of Olfa safety knives, Gr8 pro safety knives, Bosch planer blades, Black & Decker planer blades, Dolphin knives and Delfin knives is extensive, and as a company we can provide individuals and businesses with anything they need. We also offer a range of Stanley knife blades which include blades for the Stanley 1992, Stanley 5192 and Stanley 1996. Our extensive range of Swann-Morton blades can also be ordered from the Knife-Point website.

Here at Knife-Point, we are pleased to provide our customers with free delivery for every single item listed on our website including safety knives, trimming knife blades, woodworking planer blades, hooked blades and concave blades, as well as all the other types of knives and blades that we stock. Knife-Point also offers very competitive rates for worldwide air mail or courier shipments on safety knives, scraper blades, and wood working planer blades.

All of the prices of our dolphin knives, scraper blades and carpet fitting tools include 20% VAT so the price you see on our website is the price you pay, with no hidden costs. We are also able to negotiate rates for volume of knives ordered, for example, by buying Stanley knife blades, 9mm snap off blades and carpet fitting tools in bulk, a substantial saving can be made. The prices on all of our safety knives, snap off blades and carpet fitting tools are very competitively priced with no minimum order values.

If you take advantage of our discounts for large amounts of safety knives, Don Carlos knives, and scraper blades that you order, or any item from the extensive range of blades that Knife-Point has to offer, you can pay in a variety of different ways. We offer a diverse number of ways to pay for any of our safety knives, carpet fitting tools and wood working planer blades, including PayPal, Google Checkout / Google Wallet, debit cards or credit cards, and even cheques.

Quality knives and blades including safety knives, hooked and concave blades, and carpet fitting tools

Based in the steel city of Sheffield, Knife-Point stock a range of quality knives and blades including safety knives, hooked and concave blades, and carpet fitting tools. We also stock a number of branded blades which include Olfa safety knives, Gr8 pro safety knives, Bosch planer blades, Black & Decker planer blades, Dolphin knives and Delfin knives.

Our extensive range of knife blades are a testament to the rich history of Sheffield, whose knife making and cutlery manufacture spans over a thousand years. We are proud that our trimming knife blades are made in Sheffield and we also stock the world famous Swann-Morton blades. Swann-Morton are a blade manufacturing company who are famous all over the world for their traditional blade making skills. Swann-Morton were founded in Sheffield in 1932 and continue to be a popular brand of knives worldwide.

Knife-Point is dedicated to providing only the finest quality trimming knife blades, hand knives, safety knives, hand tools and power tool accessories to businesses, professional tradesmen and to private individuals. We also stock a great range of Stanley knife blades including Stanley 1992, Stanley 5192, Stanley 1996.

Every knife on our website includes the VAT price, so the price you see advertised is the exact price that you pay. We also offer free delivery for every knife including safety knives, hooked blades, Don Carlos knives, scraper blades, and woodworking planer blades.

The products shown in our range are by no means exhaustive and our 25 years of experience covers many other sectors of industry. If you have any requirements that are not displayed on our website, please do contact us as we should be able to supply the tools that you need. We place a great degree of importance on our high quality products and competitive pricing. We also pride ourselves on excellent service and rapid delivery times.

Our full range of safety knives, trimming knife blades, Stanley knife blades and carpet fitting tools are of an exceptionally high standard. It is our intention to become your first choice supplier by meeting or exceeding your requirements on each occasion that you purchase your tools at Knife-Point. We are also able to negotiate bulk or volume purchases on our full range of knives including trimming knife blades, carpet fitting tools and even 9mm snap off blades.

The use of knives and blades in hobby craft projects

Here at Knife-Point, traditional suppliers of knives and blades based in Sheffield, we stock a huge range of crafting knives and their replacement blades at very competitive prices. Our knives, blades and tools are perfect for a variety of industries, as well as for use in trades, DIY work, crafts, and hobbies.

Our extensive range of Stanley knife blades, trimming knife blades and Swann Morton blades are perfect for hobbies and craft projects. By using good quality knives and blades such as ours, you will be able to cut a variety of materials with perfect precision and intricate detail. Our hobby tools and knives make the perfect tools for modelling and art and craft projects. Here at Knife-Point, we supply individuals and businesses with craft knives, modelling tools and wood working tools.

The trimming knife blades, safety knives, Swann Morton tools, and Olfa knives we supply at Knife-Point provide fantastic ergonomic control and superior precision cutting. Whether you need to cut through lightweight materials such as paper, card, or fabric, or thicker materials such as thin metal, plastic, balsa wood, our range of knives, blades and tools will be perfect for your crafting project.

Whether you are a professional or a hobbyist, our hand tools are perfect for hobbycraft, modelling, and art and craft. Our Olfa craft knives, trimming knife blades and scrapers, and woodworking tools will cut with careful precision to produce consistent, precise cuts. They are also durable and reliable, and will cut all grades of paper, mat board, foam board, fabrics, sheet metal and plastic.

We also offer discounts for orders of knives, blades and tools made in bulk, including our range of Olfa safety knives, gr8 pro safety knives, Bosch planer blades and Stanley knives, including Stanley 1992, Stanley 5192 and Stanley 1996. We also offer discounts for wholesale job lots which are perfect for saving money if you need to buy large quantities of knives, blades or tools at an affordable price.

We supply Stanley knives and wood working tools specifically for projects that require precision cutting and the highest levels of accuracy. Our safety knives, snap off blades, hooked blades, and concave blades provide a superior level of cutting precision that will give you the perfect cut every time.

With supreme quality craftsmanship, Knife-Point can provide you as a business or individual with 9mm snap off blades, Stanley knife blades, dolphin knives, delphin knives and don carlos knives. We also supply an extensive range of and wood working tools and branded knives and blades such as carpet fitting and floor laying tools, circular saw blades, pro Safety knives and spare blades.

Knives, blades and tools made in the traditional way

As specialist suppliers of knives and blades including delfin knives, dolphin knives, don carlos knives and snap off blades, Sheffield based Knife-Point are exceptionally proud of our roots. We offer a large selection of knives, blades and tools and have the advantage of Sheffield’s long history of quality knife making behind us.

Knife-Point are proud to keep the Steel City’s tradition alive with a great selection of knives and blades including Olfa safety knives, gr8 pro safety knives, Bosch planer blades. The knife and blade making trade may have declined in other areas of the UK, but the staff at Knife-Point are committed to maintaining Sheffield’s reputation of high quality, reliable and durable blades.

The knife and blade making process can be broken down into a few simple steps. Forging creates the initial shape of the knife blade and occurs when the blade is heated to a high temperature. A hammer and anvil is then used to make the shape of the blade. Here at Knife-Point, our range of knives, blades and tools are made by employing a range of modern and traditional techniques. This will ensure that your Olfa safety knife, don carlos knife, or Stanley knife, will be of the highest quality and workmanship, as well as providing precision cutting and excellent and control.

A common technique in traditional knife and blade making is the production of blade blanks. Snap off blades, hooked blades, concave blades, and safety knives may be made using this technique, depending on the thickness of the material and the steels alloy content.

Larger quantities of knives and blades are made using water jet cutters, electron beam cutting, lasers or by stamping sheet material. But on a smaller scale, custom knife makers may use a metal cutting band saw to cut their steel blade blanks. Belt grinders, files or hacksaws can also be used to profile a blank in the knife and blade making process. The process of making blade blanks can also be carried out using files, grinding wheels or small belt sanders, but more experienced knife and blade makers usually use a large industrial belt grinder.

There are various methods of heat treatment that can be used to make hobby craft, modelling, and art and craft tools, all of which we supply at Knife-Point. Our delfin knives, dolphin knives, don carlos knives and snap off blades may go through the process of quenching after heat treatment, however, this process differs according to type of metal and personal preferences in the knife and blade making process. Quenching of knives and blades can be carried out using oil, animal tallow, water, air, or brine.

There are a variety of blade finishes used in the production of Stanley knives, safety knives and planer blades. A high polish shine can be achieved by buffing the blade with chrome oxide, or by hand rubbing the blade with fine wet-or-dry abrasive paper. Here at Knife-Point, our range of knives, including Stanley knives, Stanley 1992, Stanley 5192 and Stanley 1996 are all of the highest quality and a testament to the knife making history of Sheffield.

Postage and cancellation of knives and blades

Your order of scraper blades, safety knives and hooked blades from Knife -Point can be cancelled as long as you cancel your order prior to the shipping of your trimming knife blades, hand knives, safety knives, hand tools and power tool accessories. This cancellation will not result in any penalty being incurred and full credit of your account if monies have been taken to pay for you order of Stanley knife blades including Stanley 1992, Stanley 5192, Stanley 1996. To cancel any order of knife blades and hooked blades, simply cancel an order by following the links on the Knife-Point website.

When you are ordering Don Carlos knives, scraper blades and woodworking planer blades from the Knife-Point website, you will only pay one delivery charge per order. The delivery charge requested for each order of Olfa safety knives and Gr8 pro safety knives will be the highest depending on the contents of your order and your chosen delivery service.

When you have added items such as trimming knife blades, 9mm snap off blades and carpet fitting tools to your shopping basket, the standard delivery charge for those products will be automatically applied to your order.

Although we take a huge amount of pride in our fantastic range of safety knives, trimming knife blades, Stanley knife blades and carpet fitting tools, we understand that sometimes a customer may have to return an item if it not the knife or blade that they expected it would be. You may also wish to return your Bosch planer blades, Black & Decker planer blades, Dolphin knives or Delfin knives if you have simply changed your mind.

If you do need to return a trimming knife blade or carpet fitting tool purchased from Knife-Point then you have 7 working days to do so.  The power tool accessories, hand tools or hand knives must be in a resalable state and any goods or accessories that accompany the knives and blades must also come back to us.

Your order of Olfa safety knives, Gr8 pro safety knives, Bosch planer blades, Black & Decker planer blades, Dolphin knives and Delfin knives should also be returned to Knife –Point with their original packaging. If the return is due to missing or faulty parts then we will offer a full refund or replacement of your safety knife, Stanley knife or scraper blade, provided we are aware of this within 3 working days. Any refund, which is due to a fault or other defect, will include a refund of the applicable delivery charge.

Delivery of knives and blades from Knife-Point

Here at Knife-Point, we deliver durable and high quality knives, blades and tools to locations all over the UK. From trimming knife blades, hand knives and safety knives to hand tools and power tool accessories, Knife-Point aim to deliver quickly and reliably. Hooked blades, Don Carlos knives, scraper blades, and woodworking planer blades can be delivered to any address as long as the address at which your payment card is registered is also present on your order of knives and blades.

All deliveries of safety knives, trimming knife blades, Stanley knife blades and carpet fitting tools must be signed for, except items sent by post and which are small enough to be put through your letterbox. It is also important that you keep the receipt enclosed with your hooked blade, scraper blade and Don Carlos knives.

When you add Stanley knife blades including Stanley 1992, Stanley 5192, and Stanley 1996 blades to your Shopping Cart, the ‘UK Standard Delivery’ option will be added automatically. It is the responsibility of the buyer of the knives and blades to amend the shipping option should they require recorded delivery or export. On the Knife-Point website, you will always be able to see this charge before submitting your order of trimming knives, trimming knife blades, 9mm snap off blades and carpet fitting tools.

All delivery timescales of Olfa safety knives, Gr8 pro safety knives, Bosch planer blades, Black & Decker planer blades, Dolphin knives and Delfin knives are subject to product and delivery slot availability. Small parcels may be delivered via Royal Mail. The UK Standard Delivery is option means that the delivery of your safety knives, snap off blades and carpet fitting tools may take between three to five working days on average.

The contents of your order of Olfa safetly knives, Gr8 pro safety knives, Boche planer blades and Black & Decker planer blades  and your delivery postcode area will determine which delivery services you will be offered. Knife – Point do not deliver scraper blades or dolphin knives to Post Office (P.O.) boxes or shipping agent addresses. Knife-Point will select the most appropriate carrier for your order of Stanley knives, Stanley knife blades and wood working planer blades.

WORLDWIDE RECOGNITION FOR SHEFFIELD KNIVES AND BLADES

Sheffield continues to receive recognition around the world for its knife, blade and cutlery making skills. Knife-Point are a Sheffield based business with over twenty five years of experience in the knife and blade trade, supplying Stanley knife blades, hooked blades, concave blades and carpet fitting tools to a range of customers and industries throughout the UK. Thanks to Sheffield’s excellent reputation for making knives and knife makers, Knife-Point is regarded as a reputable and popular choice for business and individuals alike.

As a traditional Sheffield based knife and blade company, we supply knives and blades to a variety of business throughout the UK and the world. We manufacture and supply Olfa safety knives, gr8 pro safety knives, Bosch planer blades and Stanley knives, including Stanley 1992, Stanley 5192 and Stanley 1996.

It is really important to us as a company contributing to upholding Sheffield’s reputation as the finest knife making city in the UK, that we ensure all the knives and blades we make and supply are of the very best quality. Our dolphin knives, delphin knives, don carlos knives, 9mm snap off blade and Stanley knife blades are all made to the highest standards, as you would expect from a knife or blade manufactured in the Steel city.

In the mid 1800s, highly skilled craftsmen working in the city of Sheffield were called ‘Little mesters’. Knife-Point’s reputation as a reliable and quality knife maker and supplier has been founded on the backbone of ’Little mesters’, who built the foundations for the world’s cutlery and tool making capital commonly known as the Steel city.

Sheffield employed tens of thousands of workers in the 1900’s manufacturing knives such as snap off blades, hooked blades, concave blades, and safety knives. Stainless steel was actually discovered in Sheffield in 1912 by Harry Brearley. Brearly’s successor Hatfield succeeded in patenting ‘18-8 stainless steel’, which is now the widest used alloy of this type in the world.

When you order a Swann Morton blade, a Stanley knife or an Olfa blade from Knife-Point, we can deliver to any address as long as the address at which your payment card is registered is also present on your order of knives or blades. All deliveries of delfin knives, dolphin knives, don carlos knives and snap off blades must be signed for when they are delivered, apart from items sent by post which are small enough to be posted through your letterbox. Your trimming knife blades, safety knives, Swann Morton tools, Stanley knife blades, Olfa knives, and wood working tools will always be delivered to your door in perfect condition.

Traditional Sheffield knife and blade making skills

Sheffield is well known for its traditional knife making skills. From Stanley knives to safety knives, hooked blades to concave blades, Sheffield have a history of providing the highest quality and finest workmanship. For hundreds of years, Sheffield has been the epicentre of the knife making trade having established its reputation for the production of knives and blades as early as the 13th century.

Knife makers were originally called ‘Little mesters’ in the mid 1800s. At this time, there were many highly skilled craftsmen working in the city of Sheffield. Knife-Point’s reputation as a reliable and quality knife maker and supplier has been founded on the backbone of these craftsmen, who are pillars of the world’s cutlery and tool making capital commonly known as the Steel city.

By 1900, Sheffield employed tens of thousands of workers manufacturing knives such as snap off blades, hooked blades, concave blades, and safety knives. Sheffield was also at the forefront of technology regarding the production of the very highest levels of steel. In fact, stainless steel was actually discovered in Sheffield in 1912 by Harry Brearley in Brown Firth Laboratories in Sheffield. Brearley’s successor Dr William Hatfield then carried on the development of stainless steel. Finally in 1924, Hatfield succeeded in patenting ‘18-8 stainless steel’, which is now the widest used alloy of this type in the world.

As manufacturers and suppliers of quality knives and blades in Sheffield, we know more than anyone that just about everyone born and bred in Sheffield can name a relative or two that may at some point have worked in the cutlery trade. Sheffielders really know their stuff when it comes to knives, which is why Knife-Point are proud to be able to supply and manufacture all types of knives today including dolphin knives, delphin knives, don carlos knives, 9mm snap off blade and Stanley knife blades.

We also offer a range of hooked blades, concave blades, carpet fitting tools and Olfa safety knives to individuals and businesses throughout the United Kingdom and the world. The knife making tradition is still very much alive in Sheffield, and the city continues to be recognised as a nationally important part of England’s proud industrial heritage.

INDUSTRIAL KNIFE AND BLADE WHOLESALE SUPPLIER

Here at Knife-Point, Sheffield based suppliers and manufacturers of knives and blades, we are immensely proud of our roots which are firmly based in the steel city. Our staff are dedicated to upholding the excellent reputation of knife and blade manufacturing that Sheffield still holds. Knife-Point can supply your business with a range of knives and blades including olfa safety knives, gr8 pro safety knives, bosch planer blades and Stanley knives, including Stanley 1992, Stanley 5192 and Stanley 1996.

Sheffield’s history of knife making originates with Benjamin Huntsman’s invention of crucible steel in the 1740’s. A clock maker by trade, Huntsman developed the process for making a quality of steel that had not been available before. The production of crucible steel was developed right up until 1856, when Henry Bessemer invented the Bessemer converter. Thanks to his erection of steelworks in Sheffield, the city’s scale of production increased dramatically.

Sheffield still receives worldwide recognition of its knife, blade and cutlery making skills. Sheffield based Knife-Point have over twenty five years of experience in the knife and blade trade, and are able to supply Stanley knife blades, hooked blades, concave blades and carpet fitting tools to a range of customers and industries up and down the country. Thanks to Sheffield’s excellent reputation as knife makers, Knife-Point is regarded as a reputable and popular choice for business and individuals alike.

Sheffield based Knife-Point supply and manufacture knives and blades including dolphin knives, delphin knives, don carlos knives and 9mm snap off blades for individual customers and business. We can offer competitive rates for worldwide air mail and courier shipments in order to make sure your business receives the best quality olfa safety knives, gr8 pro safety knives, bosch planer blades and black & decker planer blades, all delivered across the United Kingdom and even across the world.

Sheffield’s fame for the manufacture of knives and blades escalated in 1912, when Harry Brearley discovered stainless steel. Working from Brown Firth Laboratories in Sheffield, Harry Brearley then allowed his successor Dr William Hatfield to continue the development of the alloy, finally resulting in the patented ‘18-8 stainless steel’ in 1924. This is now the widest used alloy of this type in the world.

DELFIN KNIVES, OLFA TOUCH KNIVES AND MORE FROM SHEFFIELD KNIFE SUPPLIER

The city of Sheffield has long been recognised as the knife making capital of the United Kingdom. Situated on the eastern edge of the Pennines, Sheffield utilised the advantages of its natural surroundings to become the famous knife and blade manufacturing ‘Steel City’.

Knife-Point are a Sheffield based manufacturer of knives and blades. Knife-Point as a company have over twenty five years of experience in the knife and blade trade, supplying Stanley knife blades, hooked blades, concave blades and carpet fitting tools to a range of customers and industries across the United Kingdom.

The extensive range of knives and blades on offer at Knife-Point also include Olfa Safety Knives, Gr8 Pro Safety Knives, Bosch Planer Blades, and Black & Decker Planer Blades. In addition, a range of Stanley knife blades are also available, including but not limited to Stanley 1992, Stanley 5192 and Stanley 1996 blades.

The rich history of Sheffield and its fantastic reputation for manufacturing knives and blades are reputable foundations for Knife-Point. As Sheffield based manufacturers and suppliers of knives and blades, we are extremely proud of our reputation, and consider our range of knives and blades to be a testament to the knife making heritage of the steel city.

Benjamin Huntsman developed what is known as crucible or cast steel in Sheffield in 1740. This type of steel is the perfect material for making the finest quality knives and blades. The development of cast steel allowed Sheffield to expand very quickly in the 1800’s. The steel city of Sheffield soon became famous all over the world for its production and manufacture of knives and tools. Knife-Point are proud to supply and manufacture a range of knives including safety knives, trimming knife blades, woodworking planer blades, hooked blades and concave blades, all made in the steel city itself.

By 1900, Sheffield was soon known as ‘Knife City’ as it began to produce enormous numbers of knives and edged tools. With excellent quality products, Sheffield prided itself on the manufacture of excellent quality knives and blades which were sought after throughout the United Kingdom and the world. Millions of knives and blades manufactured in Sheffield during this time are considered amongst the best examples of Victorian engineering.

Here at Knife-Point, our staff are committed to upholding the fantastic reputation of knife and blade manufacturing that Sheffield still holds. We can supply your business with a specific brand of knife or blade, including olfa safety knives, gr8 pro safety knives, bosch planer blades or black & decker planer blades. We are also fully equipped to provide businesses and individuals with certain specifications of knives including Stanley knives, Stanley 1992, Stanley 5192 and Stanley 1996.

Professional knives direct

The City of Sheffield is famous for its rich history of knife making and cutlery production that can be traced back over 1000 years. Still thought of the knife making centre of the UK, Sheffield has well and truly earned its title of Steel City. Knife Point is a Sheffield based company that specialise in the supply of an extensive range of safety knives, Swann Morton blades and Stanley Knives to both individuals and businesses.

‘Made in Sheffield’ is a very important label to have in the reputation of knife makers across the UK. And Knife Point are pleased to offer a range of Olfa safety knives, Gr8 pro safety knives, Bosch planer blades, Black & Decker planer blades, Dolphin knives and Delfin knives, that can all proudly display this famous label. Knife Point also pride themselves on offering good, fast service and competitive pricing to individuals and customers across the UK.

Knife Point also offers a wide selection of Stanley knife blades including quality blades for the Stanley 1992, Stanley 5192 and Stanley 1996. All the knives that we offer, including safety knives, scraper blades, and wood working planer blades can be ordered from our website quickly and easily via a range of payments. We also offer both individuals and customers free delivery for every safety knife, Don Carlos knife, or scraper blade that is ordered.

All the prices that are listed on the Knife Point website, including safety knives, trimming knife blades, woodworking planer blades, hooked blades and concave blades, all include 20% VAT, meaning that the price you see on the website is the full price that you will be invoiced for, not a penny more.

For large orders, Knife Point are willing to offer a bulk discount rate that can dramatically reduce the cost of your order, and your order will still be eligible for free delivery. It’s also very easy to pay on the Knife point website as we offer a range of payment methods to suit everyone including credit cards, debit cards, Google Wallet, Google Checkout and PayPal.

We are also able to offer fast delivery times on our full range of safety knives, hooked blades, Don Carlos knives, scraper blades, and woodworking planer blades, so you don’t have to wait for the product you need. As Knife Point have over 25 years of experience in the knife making trade, we also offer knives that may not be shown on our website. If you have any special requirements, we encourage business and individuals to contact us as we can usually meet your requirements.

Best quality wholesale knives

Based in Sheffield, otherwise known as the steel city, Knife-Point is dedicated to providing only the finest quality trimming knife blades, hand knives, safety knives, hand tools and power tool accessories. We are a company specialising in supplying the best hooked blades, Don Carlos knives, scraper blades, and woodworking planer blades to businesses, professional tradesmen and to private individuals.

Here at Knife-Point, specialist suppliers of knife blades including safety knives, trimming knife blades, Stanley knife blades and carpet fitting tools, we offer free UK delivery for every item listed in the extensive range of knife blades on our website. We also offer very competitive rates for worldwide airmail or courier shipments of our selection of safety knives, hand tools, power tool accessories, trimming knife blades and hand knives.

Our full range of hooked blades, Don Carlos knives, scraper blades, and woodworking planer blades are guaranteed to be of a very high standard. And our full range of knives and blades can be ordered with no minimum order quantities and no minimum order values. We are also able to offer our customers negotiated rates for large volume orders of a variety of knives and blades, including a selection of Stanley knife blades including Stanley 1992, Stanley 5192, Stanley 1996. The range of knives included in this great offer include trimming knife blades, 9mm snap off blades and even carpet fitting tools.

If you are in a rush to buy from our great range of Olfa safety knives, Gr8 pro safety knives, Bosch planer blades, Black & Decker planer blades, Dolphin knives and Delfin knives, we offer a convenient Pay and go service that couldn’t be easier. Here at Knife Point, we are very competitive with our pricing, making us a great value for money company, ideal for when you have a need for even the most specialist blade, including Swann-Morton blades.

Because the prices of our great range of scraper blades, dolphin knives, and carpet fitting tools on our website include 20% VAT, the price on our website is the price you pay.
If you are interested in owning knife blades from the finest city for knife manufacture in the UK, it is possible to pay for any order of safety knives, snap off blades and carpet fitting tools using Google Checkout, Google Wallet, credit card, debit card or PayPal, whatever is the most convenient method of payment for you.

« Previous PageNext Page »
Sheffield web design & Sheffield SEO